Printing Via Direct USB Connection
5
DPOF PRINTING Printer ready?
007 prints
Start print
Confirm
Cancel
:Set
+
Printing
002/007
:Cancel
+
Done
YOU MAY TURN
OFF THE CAMERA
:Resume
Display confirmation dialog. Press the multi selector up or down to highlight option, press I(the center of the multi selector) to select.
•Select Start print to start printing. To interrupt printing, press I, then turn camera off and disconnect USB cable.
•Select Cancel to exit without printing pictures.
Message shown above at right is displayed when printing is complete. Turn camera off and disconnect USB cable.
Before Printing
Before printing via direct USB connection, make sure that the printer supports PictBridge or USB Direct and check printer settings. See the printer manual for details.
Use a Reliable Power Source
When printing pictures via direct USB connection, be sure the battery is fully charged. If in doubt, recharge the battery before printing or use the optional
DPOF Printing
The DPOF printing option is only available if a print order has been created.
Error Messages
More on Playback
If an error message is displayed, an error has occurred. After checking the printer and resolving any problems as directed in the printer manual, high- light Resume and press Ito resume printing. Select Cancel to exit with- out printing the remaining images.
PRINTER ERROR CHECK PRINTER STATUS
Resume
Cancel
PictBridge
PictBridge is an industry standard for direct printing that ensures compatibility when different de- vices are connected.
59
