The Basics of Shooting and Playback

C Power Saving Function (Auto Off)

If no operations are performed for a while, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will flash. If no operations are performed for approximately another three minutes, the camera will turn off automatically.

While the camera is in standby mode, the monitor turns back on if you perform any of the following operations:

Press the power switch, shutter-release button, A (shooting mode) button, c (playback) button, or b (e movie-record) button

 

Flashes

No operations

No operations

performed

performed

15m 0s

3 min

9 7 0

 

Camera enters

Camera turns off.

standby mode.

 

The time that elapses before the camera enters standby mode can be changed using the Auto off setting in the setup menu (A 86).

By default, the camera enters standby mode in about 30 seconds when you are using shooting mode or playback mode.

22

Page 42
Image 42
Nikon L25, COOLPIXL26SIL, COOLPIXL26RED, COOLPIXL26BLK, 26299 manual Power Saving Function Auto Off, Camera enters