Connecting to a Printer

Connecting the Camera and Printer

1 Turn off the camera.

2 Turn on the printer.

Check printer settings.

3 Connect the camera to the printer using the supplied USB cable.

Connecting to Televisions, Computers and Printers

4 The camera turns on automatically.

When connected correctly, the PictBridge startup screen (1) will be displayed in the camera monitor. Then the Print selection screen (2) will be displayed.

1

BConnecting the USB Cable

2 Print selection

15/05

2010

NO. 32

32

When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an angle.

BIf the PictBridge Screen is not Displayed

Turn off the camera and disconnect the USB cable. Set Charge by computer (A168) in the camera’s

setup menu to Off, then connect the camera again.

147

 

Page 159
Image 159
Nikon P100 Connecting the Camera and Printer, Turn off the camera Turn on the printer, Camera turns on automatically, 147