Nikon P100, Nikon COOLPIX Sound Settings, Auto Off, 165, Adjust the following sound settings

Setup Menu

iSound Settings

Press the dbutton Mz(Setup menu) (A153) MSound settings

Adjust the following sound settings.

Button sound

Turn button sound On (default setting) or Off. A beep will sound once when the settings are completed successfully, twice when the camera focuses on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from On (default setting) or Off.

•Even when On is set, the shutter sound is not made during continuous shooting or movie recording.

kAuto Off

Press the dbutton Mz(Setup menu) (A153) MAuto off

If no operations are performed for the selected length of time, the monitor will turn off and the camera enters standby mode (A21) to reduce drain on the batteries. The power-on lamp blinks in standby mode. If no operations are performed for another three minutes, the camera will turn off.

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

CCanceling Standby Mode

Standby mode is canceled when the following buttons are pressed.

•Power switch

•Shutter-release button

•cbutton

The standby mode can also be canceled by rotating the mode dial.

Basic Camera Setup

BNotes on Auto Off

The time taken for the monitor to enter standby mode is as follows.
• When menus are displayed: three minutes
•	During slideshow playback: maximum of 30 minutes
•	When the AC adapter EH-62A is connected: 30 minutes	165