Nikon Nikon COOLPIX, COOLPIXP100 user manual Using the Flash, Auto with Red-eye Reduction

Using the Flash

Basic Photography and Playback: A(Auto) Mode

34

In dark locations or when the subject is backlit, you can shoot pictures with flash by raising the built-in flash. You can set a flash mode that suits the shooting conditions. The flash has a range of about 0.5 to 10 m (1 ft. 8 in. to 32 ft.) for wide, and about 1.7 to 2.5 m (5 ft. 8 in. to 8 ft. 2 in.) for tele (when ISO sensitivity is set to Auto).

UAuto

Flash fires automatically when lighting is poor.

VAuto with red-eye reduction Reduces “red-eye” in portraits.

WOff

Flash will not fire even when lighting is poor.

XFill flash

Flash fires when a picture is taken, regardless of how bright the subject is. Use to “fill- in” (illuminate) shadows and backlit subjects.

YSlow sync

Fill flash is combined with slow shutter speed.

Flash illuminates main subject; slow shutter speeds are used to capture background at night or under dim light.

ZRear-curtain sync

Flash fires just before shutter closes, creating the effect of a stream of light behind moving subjects.

CAuto with Red-eye Reduction

This camera uses Advanced Red-eye Reduction (“In-Camera Red-Eye Fix”).

Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.

If the camera detects “red-eye” when a picture is taken, Nikon’s own In-Camera Red-Eye Fix processes the image before it is recorded.

Note the following when taking pictures:

•Because pre-flashes are fired, there is a slight lag between when the shutter-release button is pressed and when the picture is shot.

•The time required to save the picture increases slightly.

•Advanced red-eye reduction may not produce the desired results in some situations.

•In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye reduction processing; in these cases, choose another mode and try again.

When Red-eye reduction (A163) in the setup menu is set to Pre-flash off, the shutter is released immediately when the shutter-release button is fully pressed, without firing the pre-flashes before the main flash.