Nikon Nikon COOLPIX, COOLPIXP100 user manual 189, Troubleshooting

Troubleshooting

Problem	Cause/Solution	A
	• Still pictures recorded before the clock was set (when the	22, 155
	“Date not set” indicator blinks during shooting) will have a
Date and time of	time stamp of “00/00/0000 00:00”; movie recordings will
recording are not	have a time stamp of “01/01/10 00:00.” Set the correct
correct.	date and time using Date in the setup menu.
	• Check camera clock regularly against more accurate	155
	timepieces and reset as required.
No information	Shooting data and photo information may be hidden. Press
displayed in	the sbutton until shooting data or photo information is	15
monitor.	displayed.
Date imprint not	Date has not been set.	22, 155
available.
Date not	• A shooting mode that does not support date imprint is	159
appearing on
	selected.
pictures even
	• Another function that is set now is restricting the date	159
when Date
	imprinting.
imprint is
	• The date cannot be imprinted onto a movie.	-
enabled.
Camera settings	Clock battery is exhausted; all settings were restored to their	156
reset.	default values.
	• Reset file numbering cannot be applied when the	174, 181
	folder number reaches 999 and there are images in the
cannot be done.	folder. Change the memory card, or format the internal		Technical
	mode is set to Panorama assist, or when the shooting
Reset file	memory/memory card.
numbering	• Reset file numbering cannot be set when the scene	174, 181
	mode is A, B, C, D or M and Intvl timer shooting is		Notes
	chosen for Continuous in the shooting menu.
	Battery temperature is high. Turn off camera, and allow		and
Monitor turns off,	battery to cool down before resuming use. After the lamp
			Index
and the power-on	blinks for three minutes, the camera will turn off	21
lamp blinks rapidly.	automatically, but you can also press the power switch to
	turn it off manually.
Battery inserted	• The battery is not charged when the camera is turned off.	145
	• Charging stops if the computer enters sleep mode while	-
into the camera is
	the battery is charging. The camera may be turned off.
not charged when
	• Depending upon computer specifications, settings, and	-
the camera is	power supply and allocation, it may be impossible to
connected to a
	charge the battery inserted into the camera via computer
computer.
	connection.

189