Nikon P100 Turning On and Off the Camera, Lens Error, Standby Mode Auto Power Off, Again

Charging the Battery

Turning On and Off the Camera

Remove the lens cap before turning on the camera. Press the power switch to turn on the camera. The power-on lamp (green) will light for a moment and the monitor will turn on.

Press the power switch again to turn off the camera. When the power is turned off, both the power-on lamp and monitor turn off.

•When the camera is off, holding down the cbutton will turn the camera on in playback mode (A32).

CLens Error

If Lens error. (If the lens cap is attached, turn the camera off, remove the lens cap, and turn the camera on.) is displayed, check that the lens cap has been removed and turn the camera on

again.

CStandby Mode (Auto Power Off)

If no operations are performed, the monitor turns off automatically, the camera enters standby mode and the power-on lamp blinks. If no operations are performed for another three minutes, the camera will turn off automatically.

•During shooting or playback, if no operations are performed for about a minute (default setting), the camera enters standby mode.

•If the monitor is off in standby mode (when the power-on lamp blinks), perform the following operations to turn on the monitor.

-Press the power switch, the shutter-release button or the cbutton.

-Rotate the mode dial.

•The time that elapses before the camera enters standby mode can be changed from the Auto off (A165) in the setup menu (A152).

First Steps

21