Nikon P900 Scene auto

	Display	Cause/Solution	A
		File numbering cannot be reset because the
	Cannot reset file	sequential number of a folder has reached the	10,
		upper limit.
	numbering.		E107
		Insert a new memory card or format the
		memory card.
	Memory contains no	Insert a memory card that contains images.	10
	images.
		The file was not created or edited with this
	File contains no	camera.
		The file cannot be viewed on this camera.	–
	image data.
		View the file using a computer or the device
		used to create or edit this file.
		• There are no images available for a slide
	All images are hidden.	show, etc.	–
		• There are no images that can be displayed on
		the image selection screen for deletion.
	This image cannot be	The image is protected.	E90
	deleted.	Disable protection.
		• When the scene mode is Scene auto	E4
		selector, you can capture an image even if
	Raise the flash.	the flash is lowered but the flash will not fire.
		• When the scene mode is Night portrait or	E3,
		Backlighting with HDR set to Off, you must	E7
		raise the flash to capture an image.
Reference	Failed to set clock	The camera clock was not set correctly. Change	–
		An A-GPS file that can be updated is not found
	from satellite.	the location or time and determine the location
		again.
Section		on the memory card.
		• Whether the memory card is inserted
		Check the following items:
	No A-GPS file found	• Whether the A-GPS file is stored on the	–
	on card.	memory card
		• Whether the A-GPS file saved on the memory
		card is more recent than the A-GPS file saved
		in the camera
		• Whether the A-GPS file is still valid
		Unable to update A-GPS file.
	Update failed.	The A-GPS file may be corrupted. Download the	E95
		file from the website once more.

E112