Nikon P900 Location Data Functions

Problem	Cause/Solution	A
Images to be
printed are not	The memory card contains no images.	–
displayed.
	The camera cannot be used to select the paper size in
Cannot select	the following situations, even when printing from a
	PictBridge-compatible printer. Use the printer to select
paper size with	the paper size.	–
the camera.	• The printer does not support the paper sizes
	specified by the camera.
	• The printer automatically selects the paper size.

Location Data Functions

	Problem	Cause/Solution	A
	Unable to	• The camera may not be able to identify the location	E40
		in some shooting environments. To use the location
	identify the	data functions, use the camera as much as possible
	location or it	in an open-air area.
	takes time to	• When positioning for the first time or when	E40
	identify the	positioning was unable to be performed for about
	location.	two hours, it takes a few minutes to obtain the
		location data.
	Unable to record	When z or yis displayed on the shooting screen, the
	location data on	location data is not recorded. Before shooting images,	59
	shot images.	check the location data reception.
	Difference	The acquired location data may deviate in some
	between the
		shooting environments. When there is a significant
Technical	actual shooting		E40
		meters.
	location data.
	location and	difference in the signals from the positioning satellites,
	recorded	there could be a deviation of up to several hundred
Notes
	location name is
	The recorded
and	different from	The desired landmark name may not be registered, or a	–
Index	the intended	different landmark name may be registered.
	one or is not
	displayed.

F14