Nikon S3100 Connecting the Camera to a Printer

Connecting to a Printer

Printers and Computers Televisions, to Connecting

Connecting the Camera to a Printer

1 Turn off the camera.

2Turn on the printer.

Check printer settings.

3Connect the camera to the printer using the supplied USB cable.

Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable.

4The camera is automatically turned on.

When properly connected, the PictBridge startup screen

(1) will be displayed in the camera monitor, followed by the Print selection screen (2).

1 2 Print selection

1 5/0 5

2 01 1

4

BIf the PictBridge Screen is not Displayed

Turn off the camera and disconnect the USB cable. Set Charge by computer (A150) in the camera’s setup menu to Off, then connect the camera again.

130