Macro Mode

Macro mode is used for taking pictures of objects as close as 10 cm (4 in.). Note that the flash may be unable to light the entire subject at distances of less than 50 cm (1 ft. 8 in.).

Mode (Auto) APlayback: and Photography Basic

1Press the multi selector p(macro mode).

The macro mode menu is displayed.

2Press the multi selector Hor Ito choose ON

and press the kbutton.

The macro mode icon (F) is displayed.

If the setting is not applied by pressing the kbutton within a few seconds, the selection will be canceled.

Macro mode

3Rotate the zoom control to frame the picture.

The closest distance at which the camera can focus varies depending on the zoom position. The camera can focus at the shortest distances when Fand the zoom indicator glow green with the zoom indicator positioned to the left (wider angle) of K.

The camera can focus on subjects as close as 10 cm (4 in.)

to the lens when zoomed out to the maximum wide-angle position or when zoomed in one step from the maximum wide-angle zoom position. At the Kzoom position, the camera can focus at a distance of 30 cm (1 ft.).

CAutofocus

When using A(auto) mode and Autofocus mode (A50) is set to Full-time AF, the camera continuously adjusts the focus until the shutter-release button is pressed halfway to lock the focus. Therefore, the sound of lens drive movement can be heard.

When using other shooting modes, Full-time AF is turned on automatically when macro mode is turned on.

CThe Macro Mode Setting

The macro mode setting applied in A(auto) mode is stored in the camera’s memory even after the

34camera is turned off.