Shooting Smiling Faces (Smart Portrait Mode)
At the default settings, the camera uses face detection to detect human faces, and then automatically releases the shutter when a smile is detected (smile timer). The skin softening option can be used to smooth skin tones of human faces.
1Press the Abutton in shooting mode, press the multi selector H
or Ito select F, and press the k
button.
Smart portrait
Shooting on More
The camera enters smart portrait mode.
2Frame a picture.
Point the camera at the subject.
When the camera detects a human face, a yellow double |
|
border (focus area) is displayed around that face. When |
|
focus is acquired on that face, the double border will turn |
|
green for a moment and focus is locked. | 1 /25 0 F3.2 |
Up to three faces can be detected. When the camera
detects more than one face, the double border is displayed around the face closest to the center of the frame, and single borders around the others.
3The shutter is automatically released.
If the camera detects that the face framed by the double border is smiling, Smile timer (A68) is activated and the shutter is automatically released.
Each time the shutter is released, the camera again initiates face detection and smile detection operations for continuous automatic shooting.
4Shooting ends.
To stop automatic shooting of smiling faces, either turn the camera off, set Smile timer to Off, or press the Abutton and select another shooting mode.
66