
Focusing on a Moving Subject (Subject Tracking Mode)
Changing Subject Tracking Mode Settings
While using s(subject tracking) mode (A69), press the dbutton (A10) and then set the following options in the subject tracking menu.
•Use the multi selector to choose and apply settings (A9).
•Press the dbutton to exit the menu.
Image mode
Choose the image mode (combination of image size and compression rate) at which images are saved (A38).
Changes made to the image mode setting are applied to all shooting modes.
Autofocus mode
Allows you to set the Autofocus mode (A50) used for subject tracking mode (the default setting is
When using subject tracking mode while set to
Changes made to the autofocus mode setting in this mode will not be applied to the autofocus mode setting in the A(auto) mode. The autofocus mode setting applied in the subject tracking mode is stored in the camera’s memory even after the camera is turned off.
Face priority tracking
When On (default setting) is selected and the camera detects a human face, that person is automatically registered as the subject to be tracked, and subject tracking begins tracking that subject.
BNotes on Face Priority Tracking
Shooting on More
• Only one subject can be tracked. If the camera detects multiple faces at the same time, the face closest to the center of the frame is tracked.
• When the frame includes more than one face, the face detected by the camera and registered as the subject to be tracked depends upon a variety of factors, including the direction in which the faces are looking.
• Depending on shooting conditions, such as whether or not the subject is facing the camera, the face may not be detected properly. Additionally, the camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed - When faces take up too much or too little of the frame
• When the camera is unable to track the registered subject, press the kbutton to track again, or set Face priority tracking to Off, frame the picture so that the subject is inside the border in the
center of the frame, and press the kbutton to register the subject again.
71