Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

 

Display

Description

 

Solution

A

 

O(blinks)

Clock not set.

Set date and time.

138

 

 

 

 

 

 

 

N

Battery exhausted.

Charge or replace the battery.

12, 14

 

Battery exhausted.

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn off camera, and allow

 

 

 

 

battery to cool down before

 

 

 

 

resuming use. After five

 

 

 

 

seconds, the monitor will turn

 

 

P

Battery temperature is

off and the power-on lamp

 

 

Battery temperature

and flash lamp will blink

17

 

high.

 

high

rapidly. After the lamps blink

 

 

 

 

 

 

 

for three minutes, the camera

 

 

 

 

will turn off automatically.

 

 

 

 

Pressing the power switch

 

 

 

 

also turns off the camera.

 

 

Q(● blinks red)

Camera cannot focus.

Refocus.

26, 27

 

Use focus lock.

47

 

 

 

 

 

 

 

 

 

 

P

Camera cannot perform

Wait until message clears

 

 

Please wait for the

 

 

other operations until

from display automatically

 

camera to finish

 

recording is complete.

when recording is complete.

 

 

recording.

 

Technical

 

 

 

 

protected.

 

 

 

 

 

u

Write-protect switch is

Slide write-protect switch to

 

 

Memory card is write

in “lock” position.

“write” position.

21

 

 

 

Notes

 

 

 

 

 

This card cannot be

 

Use approved card.

160

 

P

 

 

 

 

and

used.

Error accessing memory

Check that connectors are

20

 

clean.

 

Index

P

card.

 

 

Confirm that memory card

20

This card cannot be

 

 

 

 

 

read.

 

 

is correctly inserted.

 

 

 

 

 

 

 

 

 

Formatting deletes all data

 

 

 

 

stored on the memory card.

 

 

P

 

Be sure to select No and make

 

 

Card is not formatted.

Memory card has not

copies of any pictures you

 

 

Format card?

been formatted for use

wish to keep before

21

 

Yes

in this camera.

formatting the memory card.

 

 

No

 

Select Yes and press the k

 

 

 

 

button to format the memory

 

 

 

 

card.

 

162