Setup Menu

Sound Settings

dbutton Mz(Setup menu) (A136) MSound settings

Adjust the following sound settings.

Button sound

Select On (default setting) or Off.

When On is selected, a beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Select On (default setting) or Off.

No sound is played with shutter release when some features such as continuous shooting or BSS (best shot selector) are enabled, or when shooting in Pet portrait scene mode or recording movies, even if On is selected.

Auto Off

dbutton Mz(Setup menu) (A136) MAuto off

When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A17) to save power.

In this option, set the time allowed to elapse before the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.

CWhen the Monitor Turns off for the Power Saving Function

•Power-on lamp blinks in standby mode.

•Camera turns off after three minutes passes in standby mode.

•To reactivate the monitor while the power on lamp is blinking, press any of the following buttons: - Power switch, shutter-release button, A button, cbutton or b(emovie-record) button

Setup Camera Basic

CAuto Off Settings

The time allowed to elapse before the camera enters standby mode is fixed in the following situations:

• When a menu is displayed: three minutes

• During slide show playback: up to 30 minutes

• When the AC adapter EH-62G is connected: 30 minutes

147