ENGLISH

USER MANUAL

BEFORE STARTING THE MACHINE

CAUTION!

Make sure that there are no open doors/hoods and that the machine is in normal operating conditions. Make sure that the hopper (17) is properly closed.

If the machine has not been used after being transported, check that all the blocks used for the transportation have been removed.

1.If necessary, open the hood (7), unscrew the cap (61), and refuel; then close the hood (7).

CAUTION!

Do not fill the fuel tank to the top. Leave at least a space of 25 mm in the filler to allow the fuel to expand.

2.Perform the maintenance procedures according to the the Scheduled Maintenance Table (see the relevant paragraph).

STARTING AND STOPPING THE MACHINE

Starting the machine

1.Sit on the driver's seat (25).

2.If necessary, adjust the seat to a comfortable position by using the lever (31).

If necessary, use the lever (93) to tilt the steering column (1) forward or backward in order to reach a comfortable position.

CAUTION!

Always keep the choke lever in open position before starting the engine: the ignition system does not require employment of the choke lever.

CAUTION!

Do not start the engine by using the manual starting cord: the engine is equipped with electrical ignition by starter.

3.Turn the ignition key (82) to "I", then to "II" and start the engine. When the engine starts, release the ignition key immediately; it will go back to "I".

CAUTION!

When starting the engine with the ignition key (82) do not press the pedal (2).

CAUTION!

After cranking, the engine does not stay at idle, it immediately reaches the target engine speed.

The throttle lever is adjusted by the Manufacturer: do not tamper with it nor use it to change the engine speed!

CAUTION!

The engine cannot be started when the hood (7) is open. A safety system prevents the engine from starting.

4.Warm up the engine for a few minutes, according to the ambient temperature.

5.Disengage the parking brake by pressing and releasing the pedal (3).

6.Drive the machine to the working area, by keeping the hands on the steering wheel and pressing the pedal (2) on the front side to move forward and on the rear side to move backward.

The drive speed can be adjusted from zero to maximum speed by increasing the pressure on the pedal (2).

NOTE

The seat (25) is equipped with a safety sensor, which allows the machine to be driven by pressing the pedal (2) only when the operator is on the driver's seat.

14

146 2559 000(2)2007-02 A

SR 1100S P

Page 63 Page 65
Page 64
Image 64
Nilfisk-Advance America SR 1100S Before Starting the Machine, Starting and Stopping the Machine, Starting the machine
Page 63 Page 65

SR 1100S specifications

The Nilfisk-Advance America SR 1100S is a robust, versatile scrubber designed to meet the diverse cleaning needs of various commercial environments. Ideal for both small and medium-sized spaces, this machine excels in performance, efficiency, and ease of use, making it an excellent choice for businesses looking to achieve a high standard of cleanliness.

One of the standout features of the SR 1100S is its compact and ergonomic design. This allows for easy maneuverability in tight spaces such as aisles, smaller retail environments, and crowded areas. The machine is equipped with a highly efficient brush system that ensures effective scrubbing while reducing water and detergent consumption, enabling operators to achieve optimal results while also being environmentally conscious.

The SR 1100S is powered by a reliable battery system that offers an impressive run time. This allows for extended cleaning sessions without the need for frequent recharging, which can be a significant advantage in busy commercial settings. Additionally, the scrubber features a simple control panel, making it user-friendly for operators of varying skill levels. The intuitive design means that staff can quickly learn to operate the machine, enhancing productivity throughout the organization.

One of the key technologies employed in the Nilfisk-Advance America SR 1100S is the advanced Ecoflex system. This innovative technology enables users to adjust the water and detergent flow according to the specific cleaning needs of each task. This not only helps in conserving resources but also ensures that surfaces are cleaned effectively, regardless of the level of soiling.

Furthermore, the SR 1100S is designed with operator safety in mind. With features that reduce noise levels during operation, it makes it suitable for use in noise-sensitive areas, such as schools and hospitals. The scrubber is also built with maintenance accessibility in mind, allowing for quick and easy servicing, which minimizes downtime.

In conclusion, the Nilfisk-Advance America SR 1100S is a powerful, efficient, and user-friendly scrubber that is backed by advanced technology. Its compact design, effective cleaning capabilities, and operator-friendly features make it a valuable addition to any cleaning fleet. With its commitment to sustainability and efficiency, the SR 1100S is an ideal choice for businesses aiming to maintain a clean and safe environment for employees and customers alike.
Top Page Image Contents