Nilfisk-Advance America Troubleshooting, Scrapping, English, User Manual, SR 1100S P

ENGLISH

USER MANUAL

TROUBLESHOOTING

Trouble	Possible cause	Remedy
	The battery connector (46) is disconnected.	Connect the battery connector.
	The engine oil level is low.	Add engine oil. (1)
When the ignition key is turned to "I", the engine	The fuel level is low.	Refuel. (1)
does not start.	The fuel does not reach the carburettor.	Check the connecting hose. (1)
	The hood is not properly closed.	Close the hood properly.
	The spark plug does not produce a spark.	Clean/replace the spark plug. (1)
The engine stops during operation.	The engine oil level is low.	Add engine oil. (1)
	The fuel level is low.	Refuel. (1)
	The parking brake is engaged.	Disengage the parking brake.
The machine does not move when pressing the
	When starting the machine with the ignition	Start the machine with the ignition key (82),
pedal (2).
	key (82), the pedal (2) is pressed, or the	only after being on the driver's seat and
	operator is not yet on the driver's seat.	without pressing the pedal (2).
The main broom does not work.	The circuit breaker (47) is deactivated.	Reset the fuse (47) by pressing the relevant
		switch.
	The main broom is not lowered.	Lower the main broom.
The side brooms do not operate.
	The circuit breaker (48) is deactivated.	Reset the fuse (48) by pressing the relevant
		switch.
		To detect the failure, refer to the Service
The dive system malfunction led (49) is fl ashing.	The drive system is malfunctioning.	Manual (at any Nilfi sk-Advance Service
		Center).

(1) For the relevant procedure, see the Petrol Engine Manual.

For further information, refer to the Service Manual, available at any Nilfi sk-Advance Service Center.

SCRAPPING

Have the machine scrapped by a qualifi ed scrapper.

Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to the Law in force:

–Batteries

–Engine oil

–Polyester dust fi lter

–Main and side brooms

–Plastic hoses and components

–Electrical and electronic components (*)

(*)Refer to the nearest Nilfi sk-Advance Center especially when scrapping electrical and electronic components.

24

146 2559 000(2)2007-02 A

SR 1100S P