Nilfisk-Advance America SR 1800S 2WD Manual Purpose and Contents, Target, Identification Data

USER MANUAL

ENGLISH

INTRODUCTION

NOTE

The numbers in brackets refer to the components shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.

Before carrying out any procedure on the machine, the operators and qualifi ed technicians must read this Manual carefully. Contact Nilfi sk-Advance in case of doubts concerning the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualifi ed to perform the machine maintenance.

The operators must not perform procedures reserved for qualifi ed technicians. Nilfi sk-Advance will not be responsible for damages coming from failure to follow these instructions.

HOW TO KEEP THIS MANUAL

The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause damage to it.

DECLARATION OF CONFORMITY

The EC Declaration of Conformity (Fig. A), supplied with the machine, certifi es the machine conformity with the law in force.

NOTE

One copy of the original EC Declaration of Conformity is provided together with the machine documentation.

NOTE

If the machine is approved to be used on public roads, the machine is supplied with a special Certifi cation of Conformity.

IDENTIFICATION DATA

The machine model and serial number are marked on the plate (1, Fig. E).

The machine model year is written in the EC Declaration of Conformity and it is also indicated by the fi rst two fi gures of the machine serial number.

This information is useful when requiring machine spare parts. Use the following table to write down the machine identifi cation data.

MACHINE model .................................................................

MACHINE serial number .....................................................

CAUTION!

The machine serial number is also printed on the machine frame (2, Fig. D).

OTHER REFERENCE MANUALS

–Spare Parts List (supplied with the machine): 33015056

–Service Manual (that can be consulted at Nilfi sk-Advance Service Centers): 33015626

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures must be performed by qualifi ed personnel or by Nilfi sk- Advance Service Centers. Only original spare parts and accessories must be used.

Call Nilfi sk-Advance for service or to order spare parts and accessories, specifying the machine model and serial number.

CHANGES AND IMPROVEMENTS

Nilfi sk-Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such benefi ts to the machines that were previously sold.

Any change and/or addition of accessory must be approved and performed by Nilfi sk-Advance.

SR 1800S D 2WD

33014097(2)2006-12 A

3