USER MANUAL
ENGLISH
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions, which are to be defi ned by the person in charge of the maintenance.
WARNING!
Maintenance procedures must be performed when the machine is off (ignition key removed).
Moreover, read carefully the instructions in Safety chapter before performing any maintenance procedure.
NOTE
When performing maintenance procedures, use only original spare parts.
All scheduled or extraordinary maintenance procedures must be performed by qualifi ed personnel, or by an authorised Service Center.
This Manual contains the Scheduled Maintenance Table and describes only the easiest and most common maintenance procedures.
For other maintenance procedures contained in the Scheduled Maintenance Table or for extraordinary maintenance procedures see the Service Manual that can be consulted at any Service Center.
SCHEDULED MAINTENANCE TABLE
| Every 10 hours | Every | Every | Every | Every | Long | ||
Maintenance | (after the first 50 | 200 | 600 | 1,200 | 2,400 | |||
or before use | periods | |||||||
| hours) | hours | hours | hours | hours | |||
|
|
|
Engine oil level check
Engine air fi lter cleaning
Engine radiator fi n cleaning check
Engine coolant level check
Battery fl uid level check
Hydraulic system oil level and drain fi lter effi ciency check
Hydraulic system oil cooler fi n check and cleaning
Hopper cleaning and gasket check
Brake fl uid level check
Reverse gear buzzer operation check
Diesel engine
Tyre pressure check
Dust panel check
Side broom check and adjustment
Main broom check and adjustment
Engine oil replacement
Parking brake check
(6)
(7)(8)
Alternator belt tension check
Climate control system compressor belt tension check
Diesel engine oil fi lter replacement
(7)
(8)
(7)(8)
SR 1800S D 2WD
17
