1.1Model survey and main functions
The DELTABOOSTER comprises 4 different modules:
1.A switchboard
2.A water tank
3.KEW Technology C3K pumps
4.Cabinet / frame
The DELTABOOSTER is made of stainless materials through and through.
DELTABOOSTER switchboard
The switchboard comprises:
-main (emergency) switch, to which the supply cable is connected
-control switch 24V AC
-
-maximum current breaker (short circuit and overload) for each pump
-contactors for connection of 3 or 6 pumps.
The switchboard also incorporates an electronic control that monitors the operation of the system; i.e. a) selection at any time of required pump capacity; b) even distribution of load on individual pumps; c) mixing of desired temperature of water drawn from a cold water and a hot water supply and d) the indication of status/fault on a control panel.
It also incorporates hour meters to show hours of operation of each individual pump.
The switchboard has been prepared for connection of
or for connection of
(4, 5, and 6 pump plants) (2 and 3 pump plants)
The switchboard which on delivery controls 3 pumps may later be expanded to control
The DELTABOOSTER is available for the following voltages:
3 x 230V | 50 and 60 Hz + earth (PE) |
3 x | 50 and 60 Hz + earth (PE) |
3 x | 50 and 60 Hz + earth (PE) |
6
