Nilfisk-ALTO SR 1450 B-D manuel dutilisation Machine Stop, Waste collection SR 1450 B, User Manual

USER MANUAL

Waste collection (SR 1450 B)

–Push the push-button to operate the fan.

–Skirt opening: push the distributor lever.

–Make sure that the skirt closing panel is completely open.

–To start and lower the main and side brooms, push the distributor lever.

–Pull the lever to use only the main broom.

When necessary, dump the hopper as follows:

–Lift the main and side brooms.

–Switch off the fan by pressing the push-button

–Close the skirt.

–Drive the machine to the appointed dumping area.

–Lift the hopper to the correct dumping height.

–Open the skirt.

–Lower the hopper.

–Close the skirt.

–Activate the filter shaker for approx. 20 seconds.

–Stop the brooms by moving the central lever back to the central position.

–Pull the lever to lift the main and side brooms.

–Pull the lever to close the skirt.

–Press the push-button to stop the fan.

–Push the lever to lift the hopper to the required dumping height.

WARNING!

Move the machine extremely slowly when the hopper is in the lifted position.

Maximum speed 1 km/h.

Do not dump the hopper with the machine on a slope.

–Open the skirt by pushing the lever to dump the hopper.

WARNING!

When dumping the hopper, make sure that nobody is near the machine.

–Pull the distributor lever to lower the hopper.

–Pull the lever to close the skirt.

–After dumping and with the hopper in the lowered position, activate the filter shaker for approx. 20 seconds by pressing the relevant push-button..

WARNING!

Do not activate the filter shaker with the hopper in the lifted position.

MACHINE STOP

At the end of the working shift, stop the sweeper in the appointed area with:

–Brooms in the lifted position;

–Hopper in the lowered position;

–Parking brake lever engaged;

–Lights off (if on);

–Engine off;

–Ignition key removed.

WARNING!

Never leave the hopper in the lifted position without using the safety props (1, Fig. K).

33014811(1)2005-07 A 11