Nokia 2220 Set manual touch tones, Set touch tone length, Store touch tone strings, Action

	Advanced calling features
Character	Action
p	Creates a pause when a number is dialed. The numbers you
	enter after this special character are automatically sent as
	touch tones after a 2.5-second pause.
w	Creates a wait when a number is dialed. This means that
	your phone waits for you to press the left selection key
	before it sends the number as touch tones.
*	Sends command strings to the network. Contact your
	service provider for details.
+	Use this character to link a 1-touch dialing number to a
	number in the contact list.

Set manual touch tones

1Press Menu 4-3-2-1 (Settings > Phone settings > Touch tones > Manual touch tones).

2Select one of the following options, then press Select: Continuous: Sounds tone for as long as you press and hold a key.

Fixed: Sets the tone length to 0.1 second, regardless of how long you press a key.

Off: Turns off the tones. No tones are sent.

Set touch tone length

You can also set the length of each touch tone.

1Press Menu 4-3-2-2 (Settings > Phone settings > Touch tones > Touch tone length).

2Use the Scroll up or Scroll down key to scroll to Short or Long.

Short sets the tone length to 0.1 second. Long sets the tone length to 0.5 second.

3Press Select.

Store touch tone strings

You can store touch tone strings the same way that you store names and numbers in your contact list. You can store an entire sequence of digits and send it as touch tones for frequently used strings of numbers.

Nokia 2220/2260 User Guide 61 Copyright © 2003 Nokia