Nokia 6788 Your device, Transfer content for the first time, Select Tools Utilities Switch

Your device

Transfer content You can use the Switch application to copy content such as phone numbers, addresses, calendar items, and images from your previous Nokia device to your Nokia 6788.

The type of content that can be transferred depends on the model of the device from which you want to transfer content. If that device supports synchronisation, you can also synchronise data between the devices. Your Nokia 6788 notifies you if the other device is not compatible.

If the other device cannot be switched on without a SIM card, you can insert your SIM card in it. When your Nokia 6788 is switched on without a SIM card, the Offline profile is automatically activated, and transfer can be done.

Transfer content for the first time

1Select > Tools > Utilities > Switch.

2Select the connection type you want to use to transfer the data. Both devices must support the selected connection type.

3If you select Bluetooth connectivity as the connection type, connect the two devices. To have your device search for devices with Bluetooth connectivity, select Continue. Select the device from which you want to transfer content. You are asked to enter a code on your Nokia 6788. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired.

© 2009 Nokia. All rights reserved.

	Some earlier Nokia devices may not have the Switch	device
	application. In this case, the Switch application is sent
	to the other device as a message. To install the Switch
	application on the other device, open the message,	Your
4	and follow the instructions on the display.
	On your Nokia 6788, select the content you want to
	transfer from the other device.
	When the transfer has started, you can cancel it and
	continue later.
Content is transferred from the memory of the other
device to the corresponding location in your Nokia 6788.
The transfer time depends on the amount of data to be
transferred.
Lock the keypad
You can set the keypad to lock automatically after a time-
out.
To illuminate the keypad in low light conditions, briefly
press the power key.
Find items
When a search field is available in the application, you can
use the search field to search for a name, file, or
application.

1To search for an item, enter text in the search field. The device will immediately start to search and filter the entries matching to the text you input. The more texts you input, the more accurate the search result

19