3. The Basics
Switching On/Off
Press and hold the power key for one second to switch the phone on or off.
IMPORTANT! Do not switch on the phone when cellular phone use is prohibited or when it may cause interference or danger.
Making a Call
If your phone has an extendable antenna, extend the antenna fully. As with any other radio transmitting device, avoid unnecessary contact with the antenna when the phone is switched on.
Enter the area code + number, then press 
.
Check with your operator to see if you must enter the area code.
If the PIN CALL is set to on, press 
again after the tone. See “To Activate PIN Call” on page 14 for details.
If you make a mistake dialing, press 
to erase digits
one by one. Press and hold 
to clear the whole display.
NO SERVICE appears and a beep is given if you try to make a call when your phone is outside of the cellular service area.
NOT ALLOWED appears if you try to make a restricted call.
PRESS MENU appears if Keyguard is on.
IN USE and the dialed phone number appears on the display when you press 
. The call is connected when the phone number disappears from the display.
8
