4. Place a Handrail Cover (51) on each Upright (65). Make

4

 

 

sure that the Handrail Covers are turned as shown in the

 

 

 

 

 

inset drawing.

 

 

 

Have a second person hold the Handrail (50) in the posi-

121

 

50

tion shown. Connect the Handrail Wire Harness (60) to

 

the Upright Wire Harness (63) and insert both Wire

 

 

 

Harnesses into the right Upright (65).

122

 

 

 

51

 

 

Hold a Metal Spacer (122) inside the right Upright (65)

52

 

 

and align it with the first hole in the Upright. Insert a

 

 

121

Handrail Bolt (53) with a Handrail Star Washer (52)

53

 

through the Upright and the Spacer. Hold the Handrail

60

122

65

 

(50) near the Handrail Covers (51) and finger tighten the

 

 

51

Handrail Bolt into the Handrail. Repeat this procedure on

 

 

 

63

52

the other side. Then, tighten the two remaining Handrail

 

Bolts with Handrail Star Washers into the Handrail. Be

50

65

 

careful not to pinch the wires.

 

 

51

 

 

 

 

53

 

 

 

Tighten all of the bolts used in steps 3 and 4. Press the

65

 

 

Large Endcaps (121) into the Uprights (65).

 

 

 

 

 

5.Make sure that all parts are tightened before you use the hiker. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 25). To protect the floor or carpet from damage, cover the floor under the hiker.

7

Page 7
Image 7
NordicTrack NTHK22490 user manual Careful not to pinch the wires