IBM T400S, T410SI manual Palm rest or palm rest with fingerprint reader

Table 18. Removal steps of wireless USB adapter or Intel Turbo Memory

Note: Step 1 skip step 1 .

is only for models with the wireless USB adapter. For models with the Intel Turbo Memory Minicard,

In step 1 , unplug the jack by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connector with your fingers and gently unplug them in direction of the arrow.

When installing: In models with the wireless USB adapter, route the antenna cable as shown in this figure and plug the cable firmly into the jack on the adapter.

Step	Screw (quantity)	Color	Torque
	M2 × 6 mm, flat-head, nylon-coated (2)	Silver	0.181 Nm
2
			(1.85 kgfcm)

1100 Palm rest or palm rest with fingerprint reader

For access, remove these FRUs in order:

•“1010 Battery pack” on page 75

•“1030 Solid state drive (SSD) or hard disk drive (HDD)” on page 76

Chapter 8. Removing and replacing a FRU 91