IBM T410SI, T400S manual DO NOT apply any kind of pressure to the LCD panel

The LCD panel and the peripheral parts used in this product are very sensitive. Improper handling of the LCD panel can cause damage to the parts, and may cause a system malfunction such as a missing dot, missing line, or pixel problems.

•DO NOT apply any kind of pressure to the LCD panel.

•When you lift the LCD panel, always hold the left and right edges of the panel with both of your hands. DO NOT hold the panel with one hand or hold the top and bottom edges of the panel.

•DO NOT touch or apply any kind of pressure to the print circuit board or sensitive parts as shown in the figure .

Table 31. Removal steps of LCD panel

Attention: Unplug the LCD cable with holding the left and right edges of the connector with your fingers, and gently pull the connector toward you. DO NOT unplug it with pulling the cable. Applying tension could cause the cable to be damaged or a wire to be broken.

Chapter 8. Removing and replacing a FRU 119