Table 13. Removal steps of PCI Express Mini Card for wireless LAN (continued)
When installing:
•In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN or M, and the black cable into the jack labeled AUX or A on the card. If the computer you are servicing has three cables, put the white cable in the cable protection tube.
•In models with wireless LAN card that has three antenna connectors, plug the gray cable (MAIN) into the jack labeled TR1, the white cable (3rd) into jack labeled RO or TR3, and the black cable (AUX) into jack labeled TR2 on the card.
1060 PCI Express Mini Card for wireless WAN
For access, remove these FRUs in order:
• 1010 Battery pack
Table 14. Removal steps of PCI Express Mini Card for wireless WAN
Note: Loosen the screws
1 , but do not remove them.
Chapter 8. Removing and replacing a FRU 83
