Getting Started with the Contivity Extranet Switch 1500 Series
Logging in and Supplying a Password
Start up a Web browser and enter your Switch's Management IP Address. Select an option in the navigational menu and submenu. When you are prompted for the Login and Password, enter the system default Login and Password in lowercase letters, as follows:
Login: admin
Password: setup
IMPORTANT: If you change your password and later need to access the Serial Interface Configuration, you must enter the modified password. The factory default password is no longer valid in this case. Also, make sure you change the default Administrator's Login and Password as soon as possible (refer to the Admin→Administrator display). You should then guard the Login and Password carefully. The password is case sensitive.
