Nortel Networks 8600 manual System logon

System logon 19

If each user must use a different IP address, list each user with a different IP address in the file. Configure the client IP settings to use a static IP address that matches what you configure in the secrets file.

An example secrets file looks like the following:

long * long 47.133.223.200 william * william 47.133.223.200

System logon

After the switch boot sequence is complete, a Login prompt appears. The following table shows the default values for logon and password for the console and Telnet sessions.

Table 2

Access levels and default logon values

Access level	Description	Default	Default
		logon	password
Read-only	Permits view-only configuration and	ro	ro
	status information. Is equivalent
	to Simple Network Management
	Protocol (SNMP) read-only
	community access.
Layer 1 read/write	View most switch configuration	l1	l1
	and status information and change
	physical port settings.
Layer 2 read/write	View and change configuration	l2	l2
	and status information for Layer 2
	(bridging and switching) functions.
Layer 3 read/write	View and change configuration and	l3	l3
(8600 switches only)	status information for Layer 2 and
	Layer 3 (routing) functions.
Read/write	View and change configuration and	rw	rw
	status information across the switch.
	You cannot change security and
	password settings. This access level
	is equivalent to SNMP read/write
	community access.
Read/write/all	Permits all the rights of Read/Write	rwa	rwa
	access and the ability to change
	security settings, including the CLI
	and Web-based management user
	names and passwords and the SNMP
	community strings.

Nortel Ethernet Routing Switch 8600

Commissioning

NN46205-319 01.01 Standard

30 May 2008

Copyright © 2008 Nortel Networks