Nortel Networks 8600 manual Configuring the switch with the setup utility

Configuring the switch with the setup utility 55

Table 9

Job aid: Setup utility prompt descriptions (cont’d.)

Prompt	Description and action
Please provide primary	Description: Indicates the name of the
image-file path	primary image file.
[/flash/p80a4100.img]:
	Action: Press Enter to accept the default
	(p80a4100.img), or type a different file name
	for the primary image file. To specify the path
	to the file is optional. If your run-time image
	resides on your PCMCIA card, you must
	specify the path as /PCMCIA/ filename.
Please add system prompt	Description: Specifies the text for the
[ERS-8606]:	prompt.
	Action: Press Enter to accept the default
	(ERS-8610), or type a different string of up to
	20 characters.
Please select CPU primary slot	Description: Indicates the slot number of the
(5/6) [5]:	primary central processing unit (CPU). The
	slot can be 5 or 6.
	Action: Press Enter to accept the default (5),
	or specify 6.
Primary CPU mgmt port:	Description: Specifies if you want the
autonegotiation [n] (y/n)?	primary CPU to use autonegotiation.
	Action: Enter n to accept the default, or enter
	y to indicate that you want the primary CPU
	management port to use autonegotiation.
speed (10/100) [10]:	Description: Specifies the line speed in Mb/s.
	Action: Press Enter to accept the default (10
	Mb/s), or specify 100 Mb/s.
Do you want to enable	Description: Specifies if you want the boot
automatic savetostandby	and run-time configuration files to be saved on
mode [n] (y/n)?	the backup CPU.
	Action: Enter y to save the boot and run-time
	configuration files on the backup CPU. Accept
	the default (n) to save boot and run-time
	configuration files on the primary CPU.

Nortel Ethernet Routing Switch 8600

Commissioning

NN46205-319 01.01 Standard

30 May 2008

Copyright © 2008 Nortel Networks