Nortel Networks FC9219 - FC9200 10English, Super Clean Air HEPA 12 filter, 1 2 3, Environment

Models: FC9219 - FC9200

1 116
Download 116 pages 4.29 Kb
Page 10
Image 10
10English

10English

4Reattach the top of the filter grille and push the bottom corners until they snap home (‘click’) (Fig. 28).

Super Clean Air HEPA 12 filter

The Super Clean Air HEPA 12 filter is able to remove 99.5% of all particles down to 0.0003mm in size from the outlet air.This not only includes normal house dust, but also harmful microscopic vermin such as dust mites and their excrements, which are well-known causes of respiratory allergies.

Replace the Super Clean Air HEPA 12 filter every six months.This filter is not washable.

To replace the Super Clean Air HEPA 12 filter, follow steps 1-4 of section ‘Super Clean Air filter’ above.

Washable Ultra Clean Air HEPA 13 filter

The Ultra Clean Air HEPA 13 filter is able to remove 99.95% of all particles down to 0.0003mm in size from the outlet air.This not only includes normal house dust, but also harmful microscopic vermin such as dust mites and their excrements, which are well-known causes of respiratory allergies.

Clean the washable Ultra Clean Air HEPA 13 filter every 6 months.You can clean the washable Ultra Clean Air HEPA 13 filter max. 4 times. Replace the filter after it has been cleaned 4 times.

1

2

3

-

-

-

Remove the filter grille (Fig. 29).

Take out the washable HEPA 13 filter (Fig. 30).

Rinse the pleated side of the HEPA 13 filter under a hot slow-running tap.

Hold the filter in such a way that the pleated side points upwards and the water flows parallel to the pleats. Hold the filter at an angle so that the water washes away the dirt inside the pleats (Fig. 31).

Turn the filter 180° and let the water flow along the pleats in opposite direction (Fig. 32). Continue this process until the filter is clean.

Never clean the washable filter with a brush (Fig. 33).

Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power.

4Carefully shake the water from the surface of the filter. Let the filter dry at least 2 hours before you put it back into the vacuum cleaner.

5Put the filter back into the appliance. Reattach the top of the filter grille and push the bottom corners until they snap home (‘click’) (Fig. 34).

Ordering accessories

If you have any difficulties obtaining filters or other accessories for this appliance, please contact the Philips Customer Care Centre in your country or consult the worldwide guarantee leaflet.

-Philips filter cylinders are available under service number 4322 005 17520.

-Super Clean Air filters are available under type number FC8030.

-Non-washable Super Clean Air HEPA 12 filters are available under type number FC8031.

-Washable Ultra Clean Air HEPA 13 filters are available under type number FC8038.

Environment

-Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 35).

4222.003.3090.4.indd 10

22-11-2007 10:20:08

Page 10
Image 10
Nortel Networks FC9219 - FC9200 10English, Super Clean Air HEPA 12 filter, Washable Ultra Clean Air HEPA 13 filter, 1 2 3