English
General description (Fig. 1)
ACover
BOn/off button
CSuction power knob
DCleaning brush
EMotor protection filter
FDust bucket
GDust bucket release button
HFilter cylinder case
IFilter cylinder
JHose connector
KHandgrip
LAccessory holder
MTelescopic tube
N
OCrevice tool
PSmall nozzle (specific types only)
QSmall brush
RSuper Clean Air Filter, Super Clean Air HEPA 12 filter or Ultra Clean Air HEPA 13 filter
SFilter grille
TParking slot
UCord rewind button
Important
Read this user manual carefully before you use the appliance and save it for future reference.
Danger
-Never suck up water or any other liquid. Never suck up flammable substances and do not suck up ashes until they are cold.
Warning
-Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
-Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.
-If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
-Do not point the hose, the tube or any other accessory at the eyes or ears nor put it in your mouth when it is connected to the vacuum cleaner and the vacuum cleaner is switched on.
Caution
-Do not suck up large objects, as this may cause the air passage in the tube or hose to become obstructed.
-When you use the vacuum cleaner to vacuum ashes, fine sand, lime, cement dust and similar substances, the pores of the filter cylinder become clogged. If you notice a strong decrease in suction power, clean the filter cylinder.
-Sucking up large objects may cause the air passage in the tube or hose to become obstructed. If this happens, the blockage indicator turns red to indicate that there is an obstruction that needs to be removed.
4222.003.3090.4.indd 6
