Sending messages 47
P0908524 Issue 01 Enterprise Edge Voice Messaging Reference Guide
Recording and sending a message using the Leave Message feature
To record and send a message using the Leave Message feature:
6. Enter the mailbox number or Group List number of the
person or Group you want to leave a message for. If
you do not know the mailbox number, press DIR or £
to use the Company Directory.
7. Press SEND or £ to send the message now with the
Normal delivery option. Press OPTS or ‹ for delivery
options. Press CC or › to send this message to more
than one mailbox owner, with one set of delivery
options applied to all recipients.
Note: The display shows the name of the mailbox
owner or Group (in this example, mailbox
owner Paul Wayne).
Press ® to end this session.
1. Press ƒ·°‚.
2. Enter the mailbox number or Group List number of the
person or Group you want to leave a message for. If
you do not know the mailbox number, press DIR or £
to use the Company Directory.
3. At the sound of the tone, record your message. Press
OK or £ to end your message.
4. Press SEND or £ or replace the receiver to send the
message using the Normal Delivery Option. Press
PLAY or ⁄ to listen to your message. Press RETRY or
¤ to erase and re-record your message. Press ‹ to
change the Delivery Options.
Mbox:
DIR QUIT
Wayne, Paul
OPTS CC SEND
0 new 8 saved
PLAY REC ADMIN
Mbox:
DIR QUIT
Record message:
RETRY PAUSE OK
Message options:
RETRY PLAY S END