Off-premise Message Notification 73
P0908524 Issue 01 Enterprise Edge Voice Messaging Reference Guide
9. Press OK or £ to accept the destination number
(represented by the <x>). Press ADD or ¤ to add
special characters if the destination number is a phone
or pager. For information, refer to Adding special
characters to the destination number on page 58. After
you add special characters, press OK or £ to accept
the destination number.
Note: If you chose a phone or extension destination,
go to step 11.
10. Press CHNG or ⁄ to change the destination and repeat
steps 7 to 9. Press NEXT or £ to continue.
Note: The <x> represents the type of destination
(phone, extension or pager).
11. Press CHNG or ⁄ to change the start time. Press NEXT
or £ to accept the start time.
12. Press CHNG or ⁄ to change the stop time. Press NEXT
or £ to accept the stop time.
Note: Steps 13 and 14 allow you to review the start
and stop times.
13. Press CHNG or ⁄ to change the message type to
urgent. Press OK or £ to accept the new default
message. You can choose to be notified of all new
messages or urgent messages only. This means you are
notified whenever you receive a new message.
Changing the message type to urgent means you are
notified only when you receive an urgent message.
14. Press ® to end the session.
Notify:<x>
CHNG NE XT
Start:<start time>
CHNG NE XT
Stop:<stop time>
CHNG NE XT
Msg type: new
CHNG OK
Msg notify
ADMIN SELECT