62 Transferring calls
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
Changing the Outbound Transfer parameters
To change the Outbound Transfer parameters:
5. Press ADMIN or ⁄ to set up Outbound Transfer.
6. Enter the destination extension and press OK or £.
7. Press OK or £ to accept the number.
Note: The <x> represents the extension.
8. Press CHNG or ⁄ to turn Outbound Transfer on.
9. Press QUIT or •. Press ® to end this session.
10. Press CHNG or ⁄.
Note: The <x> represents the current Outbound
Transfer destination number.
Outbound xfr
ADMIN SELECT
Ext:
RETRY OK
Accept:<x>
RETRY OK
Transfer: off
CHNG QUIT
Transfer: on
CHNG QUIT
<x>
CHNG NEXT