P0908524 Issue 01 Enterprise Edge Voice Messaging Reference Guide
Appendix A:Default values and tone commands
Default mailbox numbers for the General Delivery mailbox
s
If the Group List leading digit is one then the default General Delivery mailbox
numbers begin with two.
DTMF tone commands for setting up Off-premise Message Notification
If Enterprise Edge Voice Messaging is installed with PBX or Centrex+ and you
want to access an outside line, you must enter the command to recognize a dial tone.
For example, enter · to access an outside line, press £ and then › to recognize
dial tone and then press ¤ to enter more digits. Enter the destination number, press
£ and any required pauses. Each pause entered is four seconds long. For
definitions of Pause, Recognize dial tone and Enter more digits, refer to the
Glossary.
Mailbox number
length
Default General
Delivery Mailbox
number
210
3 100
4 1000
5 10000
6 100000
7 1000000
Option function Dialpad button
Review number ⁄
Enter more digits ¤
Insert a timed pause (4 sec) ‹
Recognize dial tone (1.5 sec) ›
Insert a # button tone fi
Insert a * button tone fl
Accept number £
Cancel and re-enter •