72 Off-premise Message Notification
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
Changing Off-premise Message Notification
To change the parameters of Off-premise Message Notification refer to:
• Changing Off-premise Message Notification parameters
•Changing the destination type from a pager to a telephone or extension on page
74
•Changing the destination type from phone or extension to a pager on page 75
Changing Off-premise Message Notification parameters
To change the Off-premise Message Notification parameters from your Enterprise
Edge telephone (assuming that you have entered a time range):
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press fl to open the Off-premise Message
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Notification.
6. Press CHNG or ⁄ to change the destination.
Note: The <x> represents the type of destination
(phone, extension or pager).
7. Press PHONE or ⁄ to choose a phone number
destination. Press EXT or ¤ to choose an extension
destination. Press PAGER or ‹ to choose a pager
number destination.
8. Enter the destination number and press OK or £. The
destination phone number cannot be longer than 30
digits.
Note: The <x> represents the type of destination
(phone, extension or pager).
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Msg notify
ADMIN SELECT
Notify:<x>
CHNG NEXT
Destination:
PHONE EXT PAG ER
<x>:
RETRY OK