48 Sending messages
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
Replying to messages
You can reply to internal message senders and to external message senders. To
reply to a message from an external message sender, your company must subscribe
to Caller ID (CLID).
Replying to an internal message sender
You can reply to a message from an internal message sender by:
1. Using the CALL option. If you select CALL, you are immediately transferred to
the internal message sender’s extension. You must have an initialized
Enterprise Edge Voice Messaging mailbox and an operating directory to use
the CALL option.
2. Using the MSG option. If you select the MSG option, begin recording your reply
at the tone.
To reply to an internal message sender:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press PLAY or ¤.
4. After you have listened to your message, press REPLY
or ·.
5. Press CALL or ¤ to call the message sender
or
press MSG or ⁄ to record and send a reply.
(Refer to Recording and sending a message using the
Open Mailbox feature on page 46.)
Pswd:
OTHR RETRY OK
1 new 0 saved
PLAY REC ADMIN
End of message
REPLY ERASE NEXT
Reply to msg
MSG CALL QUIT