Off-premise Message Notification 67
P0908524 Issue 01 Enterprise Edge Voice Messaging Reference Guide
8. Press OK or £ to accept the destination phone
number. The <x> represents the phone number. Press
ADD or ¤ to add special characters. For information,
refer to Adding special characters to the destination
number on page 58. After you add special characters,
press OK or £ to accept the destination number.
9. Enter the start time for Off-premise Message
Notification. This is a four-digit field. Any single-digit
hour and minute must be preceded by a zero.
10. Press AM or ⁄ or PM or ¤.
11. Press OK or £ to accept the start time.
12. Enter the time when Off-premise Message
Notification is to stop. This is a four digit field. Any
single-digit hour and minute must be preceded by a
zero.
13. Press AM or ⁄ or PM or ¤.
14. Press OK or £ to accept the stop time.
15. Press NEXT or £ to accept the start time that you
entered. Press CHNG or ⁄ to change the start time.
Note: Steps 16 and 17 allow you to review the start
and stop times.
16. Press NEXT or £ to accept the stop time that you
entered. Press CHNG or ⁄ to change the stop time.
17. You can choose to be notified of all new messages or
urgent messages only. Press OK or £ to accept the
default message type new. This means you are notified
whenever you receive a new message. Press CHNG or
⁄ to change the message type to urgent. Changing
the message type to urgent means you are notified
only when you receive an urgent message.
18. Press ® to end the session.
<x>
ADD OK
Start hhmm:
RETRY OK
<start time>
RETRY AM PM
<start time>
RETRY OK
Stop hhmm:
RETRY OK
<stop time>
RETRY AM PM
<stop time>
RETRY OK
Start:<start time>
CHNG NE XT
Stop:<stop time>
CHNG NE XT
Msg type: new
CHNG OK
Msg notify
ADMIN SELECT