52 Call Forwarding your calls
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
7. Press ⁄ to turn Call Display on and off.
Note: If Call Display is turned on, the voice prompt says: “Caller
information will be displayed at your set.”
If Call Display is turned off, the voice prompt says: “Caller
information will not be displayed.”
8. Replace the handset to end this session.
Call Forward with Caller ID (CLID)
The Call Forward with CLID feature is available only if your company subscribes
to CLID service. If you are not sure whether your company subscribes to CLID
service, ask your System Administrator. CLID does not appear if the caller has a
private or unknown phone number.
You can set up Call Forward with CLID to screen calls forwarded to your Enterprise
Edge Voice Messaging mailbox. If the feature is enabled, you hear an Alert tone and
the CLID information appears on the telephone display.
To talk to the caller who has been forwarded to your mailbox, press
ƒ·°‡ to interrupt the call.
To turn Call Forward with CLID on and off:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press GREET or ¤.
5. Press CFWD or ‹.
6. Press CHNG or ⁄ to turn Call Forward on and off.
7. Press CHNG or ⁄ to turn Call Display on and off.
8. Press ® to end the session.
Pswd:
OTHR RETR Y OK
0 new 0 saved
PLAY R EC ADM IN
Mailbox admin
GREET PSWD QUI T
Greeting options
REC CH OOSE CFWD
Forward calls:Y
CHNG NEXT
Display caller:Y
CHNG NEXT
Mailbox admin
GREE T PS WD Q UIT