22 / Installing the Base Station
Mounting Bracket
Mounting | Notches match to bracket. |
| |
bracket |
|
T7406 Pre-installation Programming
Before connecting the T7406 base station to your system, you must set up system programming for the handset lines.
Have the system administrator set up this programming:
1.Program Handsfree to Auto.
2.Program a maximum of three lines to each handset.
3.Assign Ring & Appear on the lines you assign to the handset.
Note: Appear only does not allow the handset to wake from Handset Asleep mode.
4.Set the Page zone to None.
Note: Handsets can send Page announcements, but they cannot receive them.
5.Set DND on Busy to Yes if you do not want your calls interrupted with a ring tone when a second call comes in. Instead, the button flashes, indicating an incoming call.
6.Other telephone programming is the same as for the M7310 telephone, with the exception of the memory key locations.
