Charging the T7406 Battery Pack / 25
First-time Charging
When you first setup your new handset, follow these steps to charge the battery and install it into the handset:
1.Charge the battery pack in the back battery port of the charger for a minimum of 30 minutes.
2.Install the battery pack in the handset.
3.Charge the battery pack in the handset for a minimum of three hours.
4.Trickle charge a spare battery pack in the back battery port of the charger for 12 hours.
The following diagrams demonstrate where the battery pack fits onto a handset, and how to trickle charge the spare battery pack.
Battery |
pack |
Note: If you |
are using a |
leather cover, |
it must be |
removed |
before you |
put your |
handset in |
charger. |
Indicator lights |
Installing a Battery Pack into the Handset
1.Position the battery pack in the bottom position on the back of the handset.
2.Snap the top of the battery pack into place.
Charging the Handset
1.Slide the handset into the charger. Make sure the handset and charger contacts touch.
2.The handset charge indicator light turns on. The battery pack indicator light is red while it is charging. The battery pack fully charges in approximately three hours. When the battery pack is fully charged, the indicator light turns green.
Note: Charging begins as soon as the handset is placed in the base station.
3.Slide the spare battery pack into the back battery port. Make sure the battery pack and charger contacts touch.
T7406 Installation Guide
