Button Mapping on the Handset / 41
Ring Again*
Transfer
Voice Call
≤¤
≤‡‚
≤flfl
Notes: *In sleep mode, the user receives visual indication only. There is no beep tone indication.
Memory buttons store telephone numbers or feature codes to give you
Handset Asleep (Save Battery Mode)
When the handset is idle for longer than 15 seconds, it automatically goes into Handset Asleep mode to conserve the battery. Incoming calls automatically wake up the handset from the Handset Asleep mode. Pressing any button on the dialpad also wakes up the handset.
Handset Asleep Mode Feature Conditions
If the handset is in Handset Asleep mode, the following features are affected:
•To receive Message Waiting Indication (MWI) when the handset is in Handset Asleep mode, press any button on the dialpad to wake up the handset.
•If the Ring Again feature is active, and the handset goes into Handset Asleep mode, there is no indication of the Ring Again feature until you press a button on the dialpad to wake up the handset. To use the Ring Again feature, press any button on the dialpad to wake up the handset.
Note: When the handset is awake, the Ring Again feature provides both an audio and a visual indication that the feature is active.
•If the Do not disturb (DND) feature is active when the handset is in Handset Asleep mode, there will be no visual notification of incoming calls, including Priority calls.
Priority calls when DND is active: When the handset is in Handset Asleep mode and a Priority call is made to the T7406,
T7406 Installation Guide
