Northern Industrial Tools P5000 user manual Attaching Converter Lenses

Attaching Converter Lenses

The optional WC-E67 wide-angle and TC-E3ED telephoto converter lenses attach as described below (the illustrations show the WC-E67). See the con- verter instruction manual for details.

1 Remove the lens ring

Turn the camera off and remove the lens ring as shown at right.

2 Remove the rear cap from the converter lens

3 Attach the UR-E20 adapter ring

Attach the UR-E20 to the camera lens as shown at right.

4 Attach the converter lens

Screw the converter lens into the UR-E20 as shown at right.

5Choose a Converter option

Rotate the mode dial to P, S, A, M, or T and select the appropriate setting for the Converter option in the camera shooting menu (B 79).

6Remove the lens cap

Remove the front cap from the converter lens.

Rotate the mode dial to P, S, A, M, or T when using optional converter lenses. To remove the converter, turn the camera off and perform steps 1–4 in reverse order. Set the Converter option in the camera shooting menu (B 79) to None when no converter is attached.

92 Technical Notes