eConverter

This option is for use with the optional converter lenses listed below. Note that these accessories require a lens adapter ring (available separately); for more information, see page 92 of this manual or the documentation provided with the converter lens.

 

Option

Description

4

None

No modifications made to camera settings. Use when no converter lens is

(default)

attached (be sure to remove lens adapter ring).

 

 

Use with WC-E67 wide-angle converter.

 

 

Camera zooms to widest angle; menu

 

 

shown at right is displayed. Choose from:

 

 

Distortion control on (default): Correct for

 

 

pin-cushion and barrel distortion. Con-

 

Wide-angle

tinuous set to Single (B 73); BSS and

 

bracketing can not be used (B 75).

g converter

 

 

Note: Distortion control reduces the area visible in the final picture.

 

 

Distortion control off: No distortion correction performed.

 

 

Zoom can be adjusted manually while Wide-angle converter is in effect;

 

 

note, however, that best results will be achieved with camera zoomed out.

 

 

Focal length at widest angle is 24mm (35-mm format equivalent, distor-

 

 

tion control off ).

 

 

 

 

 

Use with TC-E3ED telephoto converter. Camera will zoom all the way in;

 

Telephoto

optical zoom is restricted to positions near maximum zoom. Focal length

f converter

at maximum zoom is 378mm (35-mm format equivalent). Focus mode

 

 

can not be adjusted.

 

 

 

At settings other than None, a converter icon appears in the display.

AConverter

Be sure to select the appropriate option when using a converter lens. Select None when no converter lens is attached. At settings other than None, the built-in flash and AF-assist illuminator turn off, Continuous flash (B 73) can not be used. Optional flash units can still be used, although the converter may cast shadows in pictures taken with the SB-400, SB-600, or SB-800 (B 93; a wide panel is recommended when shooting with the SB-600 or SB-800). Check pictures in the monitor after shooting.

Menu Guide 79

Page 91
Image 91
Northern Industrial Tools P5000 user manual Converter, Option Description None