Northern Industrial Tools P5000 user manual DInserting the Battery, Batteries

Inserting the Battery

After charging the battery, insert it as described below.

1 Opencover the battery-chamber/memory card slot

2Insert the battery

Insert the battery in the orientation shown in the

label inside the battery chamber. The orange battery latch is pushed aside as the battery is inserted. The battery is fully inserted when the latch clicks back into place.

DInserting the Battery

Inserting the battery upside down or backwards could damage the camera. Check to be sure the battery is in the correct orientation.

Battery latch

3 Closecover the battery-chamber/memory card slot

DBatteries

Read and follow the warnings and cautions on pages ii–iii and 95 of this manual. The cam- era can be used with EN-EL5 batteries only; do not, under any circumstances, attempt to use other types. If desired, the optional EH-62A AC adapter kit can be used to power the camera for extended periods (B 90). Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

10 First Steps