Northern Industrial Tools P5000 Display Problem Solution, Electronically Controlled Cameras

Display	Problem		Solution	B
OM Printer error.	Printer error.	Check printer. To resume, highlight		—*
Check printer status.		Resume (if available) and press B.
OM Printer error:	Paper in printer is not	Insert paper	of correct size, then	62*
check paper	of selected size.	highlight Resume and press B.
OM Printer error:	Paper is jammed in	Clear jam, then highlight Resume		—*
paper jam	printer.	and press B.
OM Printer error:	Printer is out of paper.	Insert paper of selected size, then		62*
out of paper		highlight Resume and press B.
OM Printer error:	Ink error.	Check ink.	To resume, highlight	—*
check ink		Resume and press B.
OM Printer error:	Printer is out of ink.	Replace ink, then highlight Resume		—*
out of ink		and press B.
OM Printer error:	File is corrupt; image	Highlight Cancel and press B to		—*
file corrupt	can not be printed.	end printing.

* See printer manual for more information.

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the cam- era may stop functioning. In most cases, this phenomenon is caused by a strong exter- nal static charge. Turn the camera off, remove and replace the batteries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

Technical Notes 99