Northern Industrial Tools P5000 Caring for the Camera, Keep away from strong magnetic fields

Caring for the Camera

To ensure continued enjoyment of this Nikon product, observe the following precautions when storing or using the device.

DHandle the lens and all moving parts with care Do not apply force to the lens or monitor or to the lens cover, connector cover, or battery- chamber/memory card slot cover. Should the monitor break, care should be taken to avoid injury due to broken glass and to pre- vent the liquid crystal from the display from touching the skin or entering the eyes or mouth.

DDo not point the lens at strong light sources for extended periods

Avoid framing the sun or other strong light sources for extended periods when using or storing the camera. Intense light may cause deterioration in the image sensor, produc- ing a white blur effect in photographs.

D Turn the product off before removing or discon- necting the power source

Do not unplug the product or remove the battery while the product is on, or while im- ages are being recorded or deleted. Forc- ibly cutting power could result in loss of data or in damage to product memory or circuitry. To prevent an accidental interrup- tion of power, do not move the product while the AC adapter is connected.

DKeep dry

The device will be damaged if immersed in water or subjected to high levels of moisture.

DDo not drop

The product may malfunction if subjected to strong shocks or vibration.

DKeep away from strong magnetic fields

Do not use or store this device in the vicinity of equipment that generates strong electro- magnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio trans- mitters could interfere with the monitor, damage stored data, or affect the product’s internal circuitry.

DAvoid sudden changes in temperature

Sudden changes in temperature, such as occur when entering or leaving a heated building on a cold day, can cause conden- sation inside the device. To prevent con- densation, place the device in a carrying case or plastic bag before exposing it to sudden changes in temperature.

DThe AF-assist illuminator/self-timer lamp LED The light-emitting diode (LED) used in the AF-assistilluminator/self-timer lamp (B2, 25) conforms to the following IEC standard.

CLASS 1 LED PRODUCT

IEC60825-1 Edition 1.2-2001

94 Technical Notes