Northern Industrial Tools P5000 user manual First Steps, Charging the Battery, Charge the battery

First Steps

Charging the Battery

The camera uses a rechargeable EN-EL5 Li-ion battery (supplied). Charge the battery with the supplied MH-61 battery charger before first use or when the battery is running low.

1Plug the charger in

Connect the power cable to the charger (c) and then plug it into a power outlet (d). The CHARGE lamp will light (e).

e	d
c

2 Insert the battery

Remove the battery terminal cover and insert the battery as shown, matching the projections on the battery to the indentations in the charger.

3 Charge the battery

The CHARGE lamp will blink as the battery recharges. (If the lamp flickers rapidly, either the temperature is not in the range of 5–35°C/41– 95°F supported by the charger or the battery is faulty. If the battery is faulty, unplug the charger immediately and bring the battery and charger to a Nikon-authorized service representative for inspection.) A fully-exhausted battery will charge in about two hours.

Charging is complete when the CHARGE lamp stops blinking. Remove the battery and unplug the charger.

DThe Battery Charger

Read and follow the warnings on pages ii–iii of this manual. Use with compatible batteries only.

First Steps 9